CQM1H-PLB21
3.850.000₫
Module 2 ngõ vào tốc độ cao cho PLC Omron CQM1H
Hết hàng
Mô tả
Pulse I/O Board
Pulse inputs 1 and 2 can be used as high-speed counters to count pulses
input at either 50 kHz (signal phase) or 25 kHz (differential phase). Interrupt
processing can be performed based on the present values (PV) of the
counters.
Input Mode
The following three Input Modes are available:
• Differential Phase Mode (4x)
• Pulse/Direction Mode
• Up/Down Mode
Interrupts
The Board can be set to execute an interrupt subroutine when the value of the
high-speed counter matches a specified target value, or an interrupt subroutine when the PV falls within a specified comparison range.
Pulse Outputs 1 and 2 Two 10 Hz to 50 kHz pulses can be output from port 1 and port 2. Both fixed
and variable duty factors can be used.
• The fixed duty factor can raise or lower the frequency of the output from
10 Hz to 50 kHz smoothly.
• The variable duty factor enables pulse output to be performed using a
duty factor ranging from 1% to 99%.
Tình trạng: Mới 90%, không hộp
Sản phẩm nhiều người quan tâm
-
Com bo 10 rơ le mạch in Omron, 16A (SPDT), 24VDC
Mua hàng -
Rơ le bảo vệ pha, thấp áp, quá áp
Mua hàng -
Rơle trung gian Omron 14 chân 3A, có diode bảo vệ
Mua hàng -
Công tắc hành trình, loại Adjustable roller lever
Mua hàng -
Rơle chuyển mạch máy bơm, động cơ
Mua hàng -
SSR Omron 40A, ngõ vào 5-24VDC
Mua hàng -
Phụ kiện gắn bộ giữ điện cực
Mua hàng -
Đế cắm Omron 11 chân tròn
Mua hàng